Cap Off The Sprinkler Head With Ease


Cap Off the Sprinkler Head With Ease

How Can You Easily Cap Off The Sprinkler Head?

Capping off the sprinkler head is a crucial aspect of gardening as a leaky sprinkler can waste a lot of water and cause unnecessary trouble. Managing the sprinkler should be one of the priority lists of any gardener. Determining the need of capping off a sprinkler may arise when you find some leaky point around the dead-end of the sprinkler. Make sure that you check that frequently. Below are the steps that you can follow to cap off your sprinkler and make your garden spike and clean.

Finding The Dead Ends

The most important part is to find out the dead end. The most appropriate way to manage the dead ends is to cap them off from the preceding or next-to-last sprinkler. This dead-end is usually found last in the series. If the sprinkler is capped from the dead end, it leads to a wastage of water pressure. So, finding the dead-end and capping it should be cautiously done.

Cap Off the Sprinkler Head With Ease
Cap Off the Sprinkler Head With Ease

Take Off The Head Of The Sprinkler

Dig out the area near the sprinkler head using a shovel. Make a hole so deep that you can hold the riser leading to the head of the sprinkler. You might need to turn it to the left to take it off. Ensure that you do not pull out the riser and safely take off the head of the sprinkler.

Cap Off The Sprinkler

You can use Teflon tape to cap the sprinkler. After removing the sprinkler head, you should first clean all the threads around the sprinkler. The Teflon tape is supposed to be wrapped around these threads 2 or 3 times. The size of the cap is also a major determining factor. It should be the same size as that of a riser. After wrapping the Teflon tape, place the cap on the sprinkler and tighten it. The work is done.

Cap Off the Sprinkler Head With Ease
Cap Off the Sprinkler Head With Ease

PVC comes into picture when you have to cap the dead end. Cut the sprinkler head fitting with PVC cutter. Before applying the PVC cement, clean the pipe with PVC primer. Checking the seal is also important after you do the capping.

Wait, this is not done yet. You need to ensure that you fill-up the hole after completing the task. Do it neatly and cleanly and clear up all the mess. Conserving all the water resources is the need of the hour, and we should ensure that there are no leakages. Also, check out this nozzle essential for your gardening needs.

Cap Off the Sprinkler Head With Ease
Cap Off the Sprinkler Head With Ease

If you love gardening, you should also be alert about the wastage of water and make sure that there is no water leakage in your garden. It does not just waste the water, but it also damages your garden and harms the plants as well.

Keep your garden clean and proper by capping off the sprinkler heads when necessary. In the cold regions, you need to check it more often as ice leads to crack frequently. In tropical regions, water resources need to be preserved to keep your garden fresh and healthy. Happy gardening to you!

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter